The BTX MotorDrape™ is a direct-drive drapery system that operates on 12V DC power. The unique technology of this system easily handles 60 lbs. of drapery weight and spans up to 18-foot widths. The motor can be plugged into any three-prong wall outlet and requires no hard wiring. All MotorDrape™ DC model options include a built-in infrared remote control system. A wall mounted switch option is available with the MotorDrape™ DC 1000 CCM system.
BTX MotorDrape™ Features:
* Sturdy Direct Drive means no gear slipping
* Low Voltage Operation
* Automatic Limit Sensors
* Variable Speed operation
* Disengagable clutch that allows for manual operation
* Built-in Infrared Remote Receiver
BTX MotorDrape
System Options:MotorDrape™ DC 1000 Standard Motorized System with Remote
The 1000 Series MotorDrape™ DC is the ideal solution for most residential and commercial settings. The 1000 Series is aggressively priced and easy to operate. A complete system includes the headrail system, the motor, an IR receiving diode, an IR handsender, the plug-in power cord and mounting brackets. The IR receiving diode plugs into the motor by means of an RJ-11 jack. (Extended diode is also available.) The 1000 Series is controlled exclusively by the handsender. The handsender can operate up to eight motors independently and is also used to select any of the ten variable speed settings (0-9, with 0 being the slowest). Motor addresses are set electronically through the handsender and can be changed at any time.
MotorDrape™ DC 2000 Deluxe Motorized System with Remote and Programmable Control Pad
The MotorDrape™ DC 2000 Series is similar to the 1000 Series except that it features a programmable control pad. This control pad offers the following functions:
* Control of two separate motors (sheer and black-out drapery)
* Manual Switch operation (open and close) for two systems
* Programmable timer for up to eight open-close functions per 24 hours
The control pad also operates as the IR receiving diode for the handsender and is programmable for ten variable speeds.
MotorDrape™ DC 1000 CCM Contact Closure Motor
The MotorDrape™ DC 1000 CCM is specifically designed for home theater, home automation and building management systems. The 1000 Series CCM has the identical package as the standard 1000 Series system except for one point: The CCM allows you to independently operate the motor via the IR handsender, a low voltage switch or by contact closure. For contact closure, provide two maintained dry contacts per motor.
MotorDrape™ DC 0500 System for Dual Drapes
The 0500 Secondary System allows two track systems to be integrated into a sheer and a black-out drapery set. The second MotorDrape™ drapery rod will have a "secondary" motor which plugs directly into the primary 1000 or 2000 motor. The secondary motor receives all power and signals from the primary motor via a 6-wire connecting signal cord and a connecting power cord.
The 0500 Secondary System allows both tracks to operate independently, but requires only one transformer and one handsender for both motors. The 2000 Series utilizes only one wall pad for both motors. In both cases, the wiring and hook-up are simple and the total cost is less than that for two independent systems.
MotorDrape™ DC 2000B Tandem System for Heavy Curtains
Certain situations, such as heavy split-draw draperies, may require two MotorDrape™ motors on the same headrail. The 2000B configuration requires two 2000 motors, two transformers, one wall pad and one 5-wire connecting signal cable, which snaps into the RJ-12 jacks.
MotorDrape™ DC 2000C
MOTORDRAPE EXPLODED VIEW CAD DRAWING
MOTORDRAPE OVERHEAD/SIDE VIEW CAD DRAWING
MOTORDRAPE DUAL MOTORVIEW CAD DRAWING
